BRUSHED FINISH 1/4'' x 1 1/2'' (7.5mm x 38.5mm) Shoelace Stamping/Engraving Blank, 20g Stainless Steel.
Your customers will enjoy these classic brushed finish blanks as minor scratches from daily wear will not be as noticeable. Holes are 2mm x 4.5mm (.080'' x .180''), if you are looking for different size holes or blank size/shape let us know :) Laser cut, these blanks are totally flat ready for you to stamp/engrave and then after you have personalized you can use bracelet bending pliers to give them a slight curve. They are brushed finish both sides with no protective film so they may have minor scratches which can quickly be removed with medium grit sanding sponge or sand paper.
Using our stainless steel blanks will allow you to offer your customers products that are beautiful & very affordable. For many years luxury watchmakers have appreciated that stainless steel is an excellent choice for producing quality jewelry. It is hypo allergenic, does not rust, change color or tarnish. And because it is so durable, items crafted with it can be treasured for a lifetime.
1. If you are using GOOD QUALITY SHARP STAMPS, you only have to hit them slightly harder than you do for stamping silver, copper or brass
2. Stainless steel is a very strong durable metal and does not easily bend, which are very desirable qualities. However punch hole pliers & screw down punches will not work. The heavy duty punches I have listed are modified so the hole can be set to 1/16" from the blank edge (orig. only 1/4" min.) & the pin opening is coated to prevent marring the blank. Hole punching is quick & easy in stainless steel & whatever other metal you're using.